Frequently Asked Questions

FloodBoss™ Mildew-Resistant Absorbent Sock

1. Is it reusable?

The socks can be air-dried and reused only when absorbing water. If any other liquid is absorbed they cannot be reused.

2. Would this go around the base (floor) of a washing machine where heavy rains have caused a buildup of water?

The Mildew Resistant Sock will work well for your application. This product will not only absorb the water but, help contain it.

3. Can these be used outdoors to soak up puddles near the foundation of a building?

These socks are meant for indoor use to soak up water in problem areas. They are not meant for outdoor use as they would take on water from precipitation as well. They would work short term in good weather to get rid of puddles but we would not recommend keeping them outside.

4. Can these Socks be dried in a dryer?

We don't recommend placing the these socks into the dryer. If the skin on the sock gets damaged and you don't notice it, and the filler inside the sock comes out into the dryer, it can get stuck in the dryer holes, clog them, melt and become a safety issue. The best methods to dry the sock is to hang it on a line or place close to but not on a heat source such as an air vent.

5. What volume can each sock hold?

Each sock will absorb up to 1 gallon.

6. Is this product non-toxic and safe for indoor use?

This sock is made of polypropylene a type of plastic. Polypropylene in its natural and unused form is non-toxic and is safe for indoor use. The Mildew Resistant sock is not hazardous when used for its intended purpose as an absorbent, however this sock may cause irritation of the skin for those with skin sensitivity. This sock should not be left where pets or children can ingest as it can cause an intestinal blockage.

7. Is this made in the USA?

The Mildew-Resistant Absorbent Sock is made in the United States.

8. What is the filler material?

The filler is ground up polypropylene with the skin also being polypropylene.

FloodBoss™ Water Absorbent Mat

1. How much water can each pad hold?

Each Water Absorbent Pad will hold up to 30 oz of water per pad. You can also wring these pads out and reuse them during a single water cleanup.

2. How much heat can these take?

The Water Absorbent Mat has a maximum working temperature of 170F. As the temperature increases the material will being to soften and if pressure is applied along with heat it will melt to a solid form.

3. I need a smaller size. Can these be cut?

The Water Absorbent Mat is wringable and reusable for One Water Event. The Water Mat is perforated to easily tear to create two mats each 7.5" x 19". This mat can be cut to whatever size you need with a pair of sharp scissors.

4. Does this product fully dry out or do I have to throw them away after the first use?

This Mat Pad can be rung out and reused during a single water cleanup. After all of the water has been absorbed from that spill, the mat can be disposed of.

5. Does it matter which side faces up?

Both sides of the New Pig Water Absorbent Pads will absorb water. However, for the best performance we suggest the blue branded side up.

6. Are they machine washable?

The Water Absorbent Mat cannot be machine washed or dried. It can however, be wrung out by hand and air dried.

7. Do these get moldy or mildewy when left in place?

The Water Absorbent Mat is designed to absorb water in a single water spill cleanup. The Water Mat is not mildew or mold resistant as it consists mostly of cellulose material in the absorbent mat.

FloodBoss™ Super Water-Absorbing Sock

1. When used to absorb water, can these be dried and re-used?

Once the Sock is completely saturated with water, it retains the liquid. The sock will not let go of the water it has absorbed. It will not easily dry out due to the super absorbent polymer inside.